Bonn 2020 – wissenschaftliches Programm

Die DPG-Frühjahrstagung in Bonn musste abgesagt werden! Lesen Sie mehr ...

Bereiche | Tage | Auswahl | Suche | Aktualisierungen | Downloads | Hilfe

T: Fachverband Teilchenphysik

T 57: Silicon strip detectors

T 57.7: Vortrag

Mittwoch, 1. April 2020, 18:00–18:15, H-HS XVII

Loading of strip silicon modules for the ATLAS ITk upgrade phase-II — •Alessia Renardi, Sergio Diez Cornell, and Othmane Rifki for the ATLAS collaboration — DESY

The upgrade of the central tracking system of the ATLAS experiment is required for the operation at the High Luminosity LHC (HL-LHC) starting in the middle of 2027. It needs to be completely replaced for the Phase II upgrade due to increased radiation environment, detector occupancy and trigger rate, as well as aging and radiation damage of the existing inner detector. The most basic unit, a module, of the new Inner Tracker (ITk) strip detector consists of a single silicon sensor, one or two flex hybrid circuit boards where the read-out chips are located, and a power-board. For the ATLAS ITk strip End-cap six flavors of modules have been designed, different in shape and structure. All of them are glued on both sides of a low-mass carbon-fibre support structures with embedded CO2 cooling, so-called petal core. A semi-electrical petal is going to be built at DESY-Hamburg: semi-electrical modules have been produced in different institutes of the ITk strip collaboration and are going to be glued on a petal core using an automatized procedure. The glue is dispensed on the local support structure and the pattern has to be investigated in order to aim for a good glue coverage as well as the required thickness and sensor flatness. The whole procedure will be shown explaining how the robot is able to pick and place every single module and glue it on the petal core.